LM 287 User Manual – 30.10.2023
38
5 DRIVING AND USE
5.1 General
• Follow safe working methods and the instructions related to safety and operation provided in this manual.
• Never operate a machine that is not in working order. Before setting off, always check that the lights, indicators, gauges
and controls are in flawless working condition and also operational while driving.
• Perform all maintenance on time following the instructions provided in this manual.
• Carefully read the paragraphs labeled “Warning” and “Note” before operating the machine.
• Familiarize yourself with the controls and the operation of the machine and tool before starting use.
• Perform daily maintenance according to the maintenance program.
5.1.1 Running‐in a new machine
Special attention should be paid to the running‐in of a new machine, since it also affects its durability. At the start of the
running‐in, apply a light and variable load to the machine. Flexible use and variable loads help the engine and moving
machine parts even out.
For the first 50 hours of engine operation, it is advisable not to exceed 75%
of the maximum power supplied.
► Warm the engine and hydraulics before loading them.
► Do not operate the engine at idle or full load for longer than five (5) minutes.
► Avoid maintaining regular speed.
► Avoid rapid braking or changes in driving direction.
► Perform the first 50‐hour service according to the instructions in this manual.
Pay attention to the engine oil pressure and temperature while driving.
Regularly check the coolant and engine oil levels. Also pay attention to the
attachment of screws, nuts and hoses, and any abrasions (wheels, exhaust,
axles, water hoses, etc.). Tighten if necessary.
To Next Page
Loading...