► Lower the front lifter together with the tool on the A frame or the 3‐point attachment onto a level surface.
► Turn off the engine.
► When connecting a hydraulic hose to a tool, remove the protective plug from the connector and ensure that the quick
connectors (on both the machine and tool) are absolutely clean; if necessary, clean them before attaching.
► Pull back on the quick connector’s locking ring, press the connector into place and let go of the lock ring to lock the
connector into place.
► When removing the hydraulic hose of a tool, clean the top of the connector (if necessary), pull back on the locking ring,
and remove the quick connector.
► Immediately reinstall clean protective plugs onto the connectors.
► Wipe off any excess hydraulic oil.
5.7.7 Trailer hitch (optional accessory)
Figure 61
If the machine is equipped with a trailer hitch, a towable tool or trailer can be connected.
The trailer hitch has a ball with a diameter of 50 mm.
To Next Page
Loading...