LM 287 User Manual – 30.10.2023
85
6.13.4 Drive pump filter replacement (28)
The drive pump filter is changed from underneath of the machine.
The engine must not be running when replacing the filter!
Figure 104
► Remove the filter by rotating it open.
► Replace the filter (605129018885).
► Tighten properly.
► Start the engine and check for filter tightness.
6.13.5 Intake air, coolant and fuel hoses check (29)
►Inspect the hoses for any leaks, wear or damage.
►Damaged or leaking hoses must be replaced.
Never inspect hoses when the engine is running. Let the engine cool down
before inspecting the hoses.
To Next Page
Loading...