LM 287 User Manual – 30.10.2023
80
6.12.2 Oil/fluid leak check and connector/connection tightening (21)
A daily visual check must be performed (see 6.9.10, page 72).
During periodic maintenance, check that all hoses and plugs are tight. If any leaks are detected, repair them before
starting the machine.
Check the following in the machine:
• fluid and hydraulic hose connections
• radiators/condensers
• drain/filler plugs in the engine compartment and under the machine.
6.12.3 Parking brake function check (23)
Check the parking brake function (P).
Figure 97
The machine must stay safely in position on a slope of 20% when the parking brake is engaged (switch P is ON). If there
are problems with the parking brake function, contact an authorized service workshop immediately.
To Next Page
Loading...