LM 287 User Manual – 30.10.2023
39
5.2 Start‐up preparations
5.2.1 Inspections before starting the machine
► Walk around the machine and visually check for damage, leaks (oil/fluid) and wear.
► Check engine oil level.
► Check coolant level.
► Refill if necessary.
► Clean the grille and radiator if dirty.
► Check hydraulic oil level.
► Clean the air filter dust pocket.
► Check the operation of all warning lights, and the hour counter reading.
► Check the operation of headlights.
► Check the condition of the tires and their inflation pressure, at least visually.
► Inspect the condition of the safety cabin.
► Inspect the condition of all labels.
5.2.2 Fuel types
Figure 46
The fuel tank (2) is on the right side of the machine. The fuel tank is filled using the filler neck (1) in the rear right corner
of the cabin.
Heating oil must not be used as fuel for the engine. If a tax‐free fuel is used, it must be motor‐grade.
Diesel fuel can also be used in the machine.
Either summer or winter grade fuel must be used to suit the conditions.
Fuel type used must follow local laws and regulations.
Fuel type must be of a grade of following table to meet Emission certificate and warranty coverage.
To Next Page
Loading...