LM 287 User Manual – 30.10.2023
89
6.14.3 Fuel tank cleaning (34)
It is recommended always to clean the fuel tank before winter. This helps to prevent fuel system problems caused by
water. The best way to prevent the formation of condensation water is always to keep the tank as full as possible, for
example, by topping up the tank at the end of the day.
Tank cleaning:
‐ Open the drain plug on the bottom of the tank and drain the contents into a container. Never drain fuel onto the ground.
‐ Flush the tank as necessary with clean fuel.
‐ Clean the drain plug and reinstall it. If you use Teflon tape for sealing, make sure that tape pieces are not carried into
the tank.
‐ Fill the tank with fresh, clean fuel.
Spirit weakens the lubrication properties of the fuel causing damage to the pump and nozzles and may cause damage
to the seals.
6.14.4 Pressure measurement and necessary adjustment of drive hydraulics (35)
The pressure measurement and adjustment of drive hydraulics must be performed by an authorized service workshop.
6.14.5 Pressure measurement and necessary adjustment of work hydraulics (36)
The pressure measurement and adjustment of work hydraulics must be performed by an authorized service workshop.
6.14.6 Engine air filter safety element replacement (37)
To Next Page
Loading...