LM Trac 287 - Machine Specifications and Type Plate

LM 287 User Manual – 30.10.2023
4
1.1 Machine specifications and type plate
Write the data in the rows below: Owner: ____________________________________ __________________________
Address: ____________________________________ Tel.: ______________________
Main machine: Serial number: _______________________ Model:____________________
Engine: Serial number:________________________ Model:____________________
Dealer: ____________________________________ Tel.: ______________________
Spare parts provider: ______________________________ Tel.: ______________________
Maintenance provider: _____________________________ Tel.: ______________________
The machine's type plate is located behind the right door on wall of the cabin.
Figure 1 Figure 2
The type plate comprises: the CE mark and the machine's model, serial number, year of manufacture, weight, max. total
weight, max. axle weights (front/rear) and engine power.
Figure 3
Serial number is also stamped on the machine's frame on the right side, behind the fuel tank.
Figure 4 Figure 5
The engine's type plate is located on the side of the engine's cylinder block. The engine's type plate comprises the
engine model and serial number.