LOYTEC L-DALI - Page 330

L-DALI User Manual 330 LOYTEC
Version 5.2 LOYTEC electronics GmbH
Property Identifier
Property
ID
Property Datatype
Conformance
Code
Object_Identifier
75
BACnetObjectIdentifier
R
Object_Name
77
CharacterString
R
Object_Type
79
BACnetObjectType
R
Present_Value
85
UNSIGNED
R
Device_Type
31
CharacterString
R
Status_Flags
111
BACnetStatusFlags
R
Event_State
36
BACnetEventState
R
Reliability
103
BACnetReliability
R
Out_Of_Service
81
BOOLEAN
W
Scale
187
BACnetScale
R
Units
117
BACnetEngineeringUnits
R
Max_Pres_Value
65
Unsigned
R
Value_Change_Time
192
BACnetDateTime
R
Value_Before_Change
190
Unsigned
R
Value_Set
191
Unsigned
W
Time_Delay
113
Unsigned
W
Notification_Class
17
Unsigned
W
High_Limit
45
REAL
W
Low_Limit
59
REAL
W
Deadband
25
REAL
W
Limit_Enable
52
BACnetLimitEnable
W
Event_Enable
35
BACnetEventTransitionBits
W
Acked_Transitions
0
BACnetEventTransitionBits
W
Notify_Type
72
BACnetNotifyType
W
Event_Time_Stamps
130
BACnetARRAY[3] of BACnetTimeStamp
R
Profile_Name
168
CharacterString
R
Table 33: Properties of the Accumulator object representing the accumulated energy usage of DALI
groups or channels.
Object_Identifier (Read-Only)
The instance number is equal to the instance number of the corresponding Analog Output
object (see Section 8.3.3.10).
Object_Name (Read-Only)
This property holds the value of the Object_Name of the associated Analog Output object
with the addition “Energy”.
Object_Type (Read-Only)
The value of this property is ACCUMULATOR (23).
Present_Value (Read-Only)
The value of this property, of type UNSIGNED, indicates the accumulated energy usage in
Wh. For objects associated to DALI groups/channels this property reports the sum of the
accumulated energy usage of all ballasts in the DALI group/channel.