L-DALI User Manual 29 LOYTEC
Version 5.2 LOYTEC electronics GmbH
IP Configuration Menu
[1] DHCP : disabled
[2] IP Address : 192.168.1.254
[3] IP Netmask : 255.255.255.0
[4] IP Gateway : 192.168.1.1
[5] Hostname : new
[6] Domainname : <unset>
[7] DNS Servers : <unset>
[9] MAC Address : 00:0A:B0:01:0C:9F (factory default)
[0] NTP Servers : <unset> (out-of-sync)
[b] Link Speed & Duplex : Auto Detect
[q] Quit without saving
[x] Exit and save
Please choose:
Figure 8: Enter basic IP settings.
Press ‘x’ to save the IP settings and reset the device with the main menu item ‘0’ in order to
let the new IP settings take effect.
Important! The default IP address 192.168.1.254 is only set for configuration access. It must be
changed in order to make the device functional.
3.3.2 IP Configuration via the Web Interface
As an alternative to the console interface the Web interface can be used to configure the
device. In a Web browser enter the default IP address 192.168.1.254 of the L-DALI. Note
that if your PC has an IP address in a subnet other than 192.168.1.xxx please open a
command tool and enter the following route command to add a route to the L-DALI.
To Add a Route to the Device
1. Windows START Run
2. Enter ‘cmd’ and click OK.
3. In the command window enter the command line
route add 192.168.1.254 %COMPUTERNAME%
In Windows7 replace %COMPUTERNAME% with the PC’s actual IP address.
4. Then open your Web browser and type in the default IP address 192.168.1.254.
To Next Page