V. 1.0 | LPKF Laser & Electronics AG
Cleaning and lubricating the drive spindle and the linear guides
Before performing the steps, ensure that the following spare parts and auxiliaries are
available:
Spare parts and auxiliaries
Latex lab gloves
Isoflex Topas lubricant
Ravenol precision mechanics oil
Cleaning tissue
Wooden lab spatula
1. Move the processing head to the Pause position.
For detailed information on moving the processing head refer to the CircuitPro PM
Compendium.
2. Open the cover.
3. Push the bellows of the x axis to the right:
Fig. 136: Pushing the bellows to the right
4. Clean the linear guides and the drive spindle with a cotton cloth:
To Next Page
Loading...
