214325 212 Revision A
Figure 5.153: John Deere Combine Display
5. Ensure three icons (A) depicted in illustration at right
appear on combine display.
Figure 5.154: John Deere Combine Control
Console
6. Use scroll knob (A) to highlight middle icon (the green i)
and press check mark button (B) to select it. This will
display Message Center.
Figure 5.155: John Deere Combine Display
7. Use scroll knob to highlight DIAGNOSTIC
ADDRESSES (A) from right column, and then select it
by pressing check mark button.
8. Use scroll knob to highlight drop down box (B), and
press check mark button to select it.
SETTING UP AUTO HEADER HEIGHT CONTROL
To Next Page
Loading...
