214683 88 Revision A
John Deere (except S700 Series): John Deere combines use a combination of the reel fore-aft switches on the
control handle and a dealer-installed auxiliary rocker switch which toggles between reel fore-aft and header tilt
functionality.
Figure 3.89: John Deere Consoles
1. Press reel fore-aft / header tilt switch (A) on console into
HEADER TILT position.
Figure 3.90: John Deere Control Handle
2. Press switch (A) to tilt header forward (steeper angle) or
switch (B) to tilt header back (shallower angle).
OPERATION
To Next Page
Loading...
