Scala | V7 | Installation
Opening Scala
Scala should open when you switch on the computer. If not, you can open Scala from the Dock at
the bottom of the screen.
Before you begin
• Scala software dongle is plugged in the computer. Always have the dongle plugged in when using
Scala.
• Receiver is connected to the private Ethernet network.
Procedure
From the Dock at the bottom of the screen, click Scala icon.
Important: On M3, M5, M4 and M6 systems, the following window is a software that
analyzes sensors data. This program is necessary for the correct operation of the receiver. DO
NOT CLOSE this window. If the window appears, click minimize to hide it and change the
settings as indicated in Automatically Opening Scala at Start Up on page 15 to keep it hidden.
This icon should always appear at the bottom of your desktop screen:
If you close the window, restart the computer.
Note: Failed (1) and Login (2) indications are normal and always appear. You do not need to
enter anything.
Important: Do not click inside the window or you will loose the mouse. If you lost the
mouse, connect a keyboard and press ctrl + cmd (Apple) / ctrl + window key (Windows).
| 16
To Next Page
Loading...
Need help?
General