Scala | V7 | System Configuration
•
In Scala Replay, select Re-emit NMEA sentences to send NMEA data (for example
positioning data) to another software interfacing with Scala (such as a cartography software)
in order to replay data that was recorded.
Note: Scala can output NMEA data for trawl door positioning with the following
sentences:
•
and later: $PSIMS (Olex), $PTSAL (MaxSea version 12), $PMPT (TimeZero)
•
and later: adding $IIGLL (MaxSea version 12, single position sentence),
$IITPT (Simrad)
•
and later: adding $PTSAL (SeaPix)
See NMEA Outputs from Scala on page 140 for more details.
6.
Click OK.
Displaying Trawl Positioning from Scala on Olex
You can export trawl positioning data coming from Scala to Olex software.
Before you begin
•
Olex software version must be able to read PSIMS NMEA data.
• Olex software must have the ITI option (displays net position).
• You must have a GPS and door positioning sensors.
Procedure
1.
From Olex, click Settings and check:
a)
There is the ITI option. It allows the display of the trawl when positioning data from Scala is
received.
b)
The option Reversed ordering of ITI door sensors is not selected.
| 44
To Next Page
Loading...
Need help?
General