Root NIBPT Chapter 3: Operation
www.masimo.com 71 Masimo
Option Description Factory
Default
Setting
Configurable
Settings
Standby
Enabled
Enables or disables option
for Standby Mode. See
Standby Mode on page 80.
Off On or Off
Standby
Reminder Tone
Interval
Allows for time interval of
30 sec, 1 min, 2 min, 3 min,
5 min, 10 min, or 15 min, as
well as Off.
30 sec
30 sec, 1 min, 2 min,
3 min, 5 min, 10
min, 15 min, or Off
Allow Unsigned
Upgrade
Allows for Root software to
be reverted back to older
version
Off On or Off
Sessions
Enabled
Enables or disables Session
Management. See Session
Management on page 82
Off On or Off
USB Port 1*
baud rate
Enables option to change
baud rate of device
921600
9600, 19200,
38400, 57600,
115200, 230400, or
921600
USB Port 2*
baud rate
Enables option to change
baud rate of device
921600
9600, 19200,
38400, 57600,
115200, 230400, or
921600
Data Collection
Enabled
Enables or disables physical
data collection mode.
Off On or Off
EDF Collection
Enabled
Enables or disables EDF
data collection from
SedLine (See Operator's
Manual for SedLine)
Off On or Off
Synchronized
Waveforms
Enabled
Enables or disables
Synchronization Waveform
view.
Off On or Off
Presence
Monitoring
Enables or disables
Presence Monitoring
Off On or Off
Save as Adult
Saves current profile
parameter as the Adult
Profile.
N/A
Press Save to
update the profile.