CONTROLLER MENUS: 1Y.7 CONFIGURATION7 - 54
D-MAXE with OI-B/OI-N www.maxcessintl.comMI 2-296 1 D
Menu
1y.7.8.2: Restore factory settings
The factory settings are restored.
Note:
This process must only be performed when it has been
requested after consultation with an employee of
Fife-Tidland GmbH.
Note:
If nothing appears on the display of the operator interface after
a restart, a "device" must be selected with the A key.
Note:
Then commissioning of the D-MAXE Controller must be
performed.
To Next Page
Loading...
