CONTROLLER MENUS: 1Y.3 JOB SETTINGS7 - 6
D-MAXE with OI-B/OI-N www.maxcessintl.comMI 2-296 1 D
Menu 1y.3.y2 Auto
Setup
WARNING:
The drive moves during automatic setup.
There is a danger of body parts being crushed against the
actuator.
Note:
The sensors must be calibrated before the automatic setup (see
7-20
).
Description The
Auto Setup
menu is used to calibrate parameters
Gain
(
7-7
)
and
Polarity
(
7-13
) automatically for "Automatic" mode of the
selected drive.
Menu
Key sequence for menu 1y.3.y2:
Auto Setup
is started.
Save the entry or cancel
To Next Page
Loading...
