x VM600 MPS hardware manual (standard version) MAMPS-HW/E
Edition 17 - February 2018
Terminology
MPC4 cards
NOTE: The MPC4 machinery protection card is available in different versions, including a
standard version, a separate circuits version and a safety (SIL) version.
See 4 MPC4 / IOC4T card pair for additional information.
In general, MPC4 is used in this manual to refer to all versions of the card. However, where
it is necessary to make a distinction, MPC4 is used to indicate the standard and separate
circuits versions of the card and MPC4SIL is used to indicate the safety version.
Software
VM600 MPSx is proprietary software from Meggitt Sensing Systems that can configure and
manage VM600 racks containing AMC8 and MPC4 cards:
• VM600 MPS1© allows the complete configuration of a VM600 machinery protection
system and the display of live data. It is intended to be used for machinery protection
applications.
• VM600 MPS2© allows the complete configuration of a VM600 machinery protection
system and the display of historical or live data. It is intended to be used for machinery
protection and/or basic condition monitoring applications.
(VM600 MPS2 includes all of the functionality provided by the VM600 MPS1 software
with additional features, such as plots for the visualisation and trending of data.)
VibroSight
®
is proprietary software from Meggitt Sensing Systems that can configure and
manage VM600 XMx16 cards such as the XMC16, XMV16 and XMVS16, and/or
VibroSmart
®
distributed monitoring system (DMS) modules such as the VSI010 and
VSV300.
VM600 IRC4 Configurator is proprietary software from Meggitt Sensing Systems that can
configure and manage IRC4 cards.
Related publications and documentation
For further information on the use of a VM600 machinery protection system (MPS), refer to
the following Meggitt Sensing Systems (MSS) documentation:
• MPCC configuration software for VM600 series machinery protection card
(MSS document ref. MAMPCC-30/E)
• VM600 MPS1 configuration software for machinery protection systems software manual
(MSS document ref. MAMPS1-SW/E)
• VM600 MPS2 configuration software for machinery protection systems software manual
(MSS document ref. MAMPS2-SW/E)
• IRC4 Configurator for intelligent relay cards software manual
(MSS document ref. MAIRC4-SW/E).
Operators of networked VM600 racks should also refer to the following document:
• VM600 networking manual
(MSS document ref. MAVM600-NET/E).
Operators of safety-related systems (SRSs) should also refer to the following document:
• VM600 safety manual
(MSS document ref. MAVM600-FS/E).
To Next Page
Loading...
Need help?
General
