Meggitt VM600 Hardware Manual

viii VM600 MPS hardware manual (standard version) MAMPS-HW/E
Edition 17 - February 2018
Structure of the manual
This section gives an overview of the structure of the document and the information contained
within it. Some information has been deliberately repeated in different sections of the
document to minimise cross-referencing and to facilitate understanding through reiteration.
The chapters are presented in a logical order. You should read those that are most relevant
to you and then keep the document at hand for future reference.
The structure of the document is as follows:
Part I: Functional description of VM600 MPS system
Safety Contains important information for your personal safety and the
correct use of the equipment.
THIS SECTION SHOULD BE READ BEFORE ATTEMPTING TO INSTALL
OR USE THE EQUIPMENT.
Chapter 1
Introduction – Familiarises the user with the function and features of the MPS.
Chapter 2
Overview of VM600 MPS hardware – Provides information on the physical
aspects of the various cards and other components making up the system.
Describes the elements on the panels of the cards and system components.
Chapter 3
General system description – Describes the MPS from a global, rack-level
point of view. Introduces the MPC4 / IOC4T and AMC8 / IOC8T card pairs.
Describes the rack backplane and its buses.
Chapter 4
MPC4 / IOC4T card pair – Contains a block diagram of this card pair and
information on the signal processing performed by it. Provides details on
inputs and outputs, rectification techniques, alarm monitoring possibilities
(levels, delay time, hysteresis, logical combinations), the OK System and the
operation of the LEDs on the panel of the MPC4.
Chapter 5
AMC8 / IOC8T card pair – Contains a block diagram of this card pair and
information on the signal processing performed by it. Provides details on
inputs and outputs, processing functions, alarm monitoring possibilities
(levels, delay time, hysteresis, logical combinations), the OK System and the
operation of the LEDs on the panel of the AMC8.
Chapter 6
CPUM / IOCN card pair – Provides a brief overview of the function of this card
pair and contains a block diagram of each card.
Chapter 7
Processing modes and applications – Describes the operation of the MPS in
all its operating configurations (broad-band vibration, shaft relative vibration,
eccentricity, dynamic pressure and so on). Processing steps are shown in
block diagrams and additional background information on the measurement
type is provided.

Meggitt VM600 Specifications

General

Brand	Meggitt
Model	VM600
Category	Measuring Instruments
Language	English