mensor CPC6050 - Page 98

98 Operating Instructions - CPC6050
Modular Pressure Controller
CPC6050
INSTrument
:CATalog[R]? Returns the sensor pressure maximum in native
units, native pressure units, native pressure type.
Ex// INST:CAT?
:INST:CAT “1000.000psig”
:CATalog
:ALL? Returns the primary sensor’s pressure maximum
in native units, native pressure units, native pres-
sure type, secondary sensor’s pressure maxi-
mum in native units, native pressure units, native
pressure type, Barometer. If a sensor does not
exist, it is not included.
Ex// INST:CAT:ALL?
:INST:CAT “1000.000psig”, “300.0000psig”,
BAROMETER
:LIMits? Returns the instrument’s pressure maximum in
native units, native pressure units, native pres-
sure type, current upper control limit, current
lower control limit.
Ex// INST:LIM?
:INST:LIM “1000.000psig”, 1000.000,
-15.0000
:MACaddress? Returns the ethernet interface medium access
control (MAC) hardware address in XX-XX-XX-
XX-XX-XX format. Any letters will be upper case.
Ex// :INST:MAC?”
:INST:MAC ”84-EB-18-B2-97-AB”
:SENSe[R]? Returns the sensor pressure maximum in native
units, native pressure units, native pressure type.
Ex// INST:SENS?
:INST:SENS “1000.000psig”
:SENSe[R]
:CALD? Returns the sensor calibration date in the format
YYYY, MM, DD
:FULLscale? Returns the sensor maximum pressure, minimum
pressure in active units
:NEGCal? Returns 1. Negative calibration support is always
available
:SN? Returns the sensor serial number