Programming
117
Program structure
Program header
Program number, Program name, Material number, Area 1-2-3,
Name Area 1-2-3, Weight, Rated load, Min.water level, Load type,
Approved mode, Locking, Peak-load, Hot water control, Price
Area 1
Pre-wash
Pre-wash 1 to Pre-wash 10 (max. 10 blocks)
Area 2
Main wash
Main wash 1 to Main wash 10 (max. 10 blocks)
Area 3
Rinse
Rinse 1 to Rinse 10 (max. 10 blocks)
A program consists of a Program header, an area Pre-wash, an area
Main wash and an area Rinse. The areas can individually or collec-
tively form a program, however areas cannot be duplicated. The ar-
eas themselves are divided into individual blocks.
General program structures, which apply to the whole program are
configured in the program header. See menu option "Create new".
The blocks are identical for each individual area and all have the
same basic parameter settings.
The easiest way to create a new program is to copy blocks or areas
of an existing program or a whole program, and then to change it.
To Next Page
Loading...
Need help?
General
