1 Cottons Hygiene
104 Pre-wash
Main Wash 1150 rpm
+
11,0/11,0 kg
194
°F
°F
The ""field is highlighted in the display.
Tip: The function can be deselected by pressing the button again.
Tip: Press the "Starch stop" button to starch the laundry.
Tip: If you do not want a spin after the final rinse, press the "With-
out spin" button.
If you do not want to make any further changes to the program:
Press the "START" button.
The wash program will start.
Changes before
program start
If changes are to be made before the start of the program, e.g. load,
temperature or spin speed:
Load capacity
The corresponding load weight can be entered manually before the
start of the program.
1 Cottons Hygiene 11,0 /11,0 kg
Pre-wash
Main Wash
104
194
+
°F
°F
Select the "Load capacity" field by turning the multifunction selec-
tor and press the multifunction selector to confirm your selection.
Select the load capacity you want by turning the multifunction se-
lector and press the multifunction selector to confirm the value en-
tered.
Temperature
The temperature can be set in from increments of 1°F / 1°C incre-
ments from cold, 59 - to max. 203°F / 15 - 95°C before the program
start.
Select the "Temperature" field (104°F / 40°C for Pre-wash) by turn-
ing the multifunction selector and press the multifunction selector to
confirm your selection.
1 Cottons Hygiene 11,0/11,0 kg
Pre-wash
Main Wash
104
194
+
°F
°F
Change the temperature by turning the multifunction selector and
press the multifunction selector to confirm the value entered.
Spin speed
The spin speed can be altered in 25rpm increments from 300 up to
the maximum spin speed. it cannot be set between 0und300rpm.
To Next Page
Loading...
Need help?
General
