Programming
133
If the input peak load signal is present and the program is in a heat-
ing phase, the heating is turned off and the program is stopped.
"Program stopped by peak load function" appears in the display.
If the program is in Thermostop, the safety interval of the Ther-
mostop is maintained.
Hot water control
Create
Program header
:
:
YesPeak load
No
Select the "peak load" program function.
You have the following options:
– Yes
– No
Hot water control
When "Hot water control" is selected you have the choice between
automatic water valve guide and control of pre-selected water valves.
Price
Create
Program header
:
:
No
No
Hot water control
You have the following options:
– No
– Yes
If "Yes" is selected for Hot water control, the water intake valves are
"automatically" activated in such a way that the target temperature
for the wash cycle is already reached from the first intake of water
by alternately activating cold or hot water valves.
If automatic valve control is not selected the pre-selected water
valves are activated in conjunction with Hot water control "Yes"
without regard to the target temperature.
Price
If the Price option is selected a price can be allocated to a program.
The price set must be paid before the program can be started.
Price
Create
Program header
:
:
No
No
Hot water control
Select the "Price" program option.
You have the following options:
– No
To Next Page
Loading...
Need help?
General
