Frequently Asked Questions
57
Problem solving guide
With the help of the following guide, minor faults in the performance of the machine, some
of which may result from incorrect operation, can be resolved without contacting Miele
Technical Service. This will save time and money.
The following guide may help you to find the reason for a fault, and how to correct it. You
should, however, note the following:
Repair work to electrical appliances must only be carried out by a suitably qualified
person in strict accordance with current local and national safety codes. Repairs and
other work by unqualified persons could be dangerous.
The program does not start
Problem Possible cause and solution
The display remains dark. There is no power to the machine.
Check that the washing machine is switched on.
Check that washing machine is connected to the power
supply.
Check whether the fuse or circuit breaker has tripped.
A fault message appears
in the display
A program cannot be started while there is a fault message
in the display.
Note what is shown in the display.
Press the multi-function selector to confirm the message.
The fault message is deleted.
The display is dark and the
Start button indicator light
is flashing slowly.
The display has switched off automatically to save energy
(Standby mode).
Press any button. Standby comes to an end.
To Next Page
Loading...
Need help?
General
