Programming
122
Go to Source area and confirm your choice.
Select the source area Pre-wash, Main wash or Rinse and confirm
your selection.
Go to Source block and confirm your selection.
Select the source block and confirm your selection.
Either the first unlocked program or the last selected program ap-
pears as target program number.
Go to Target program number and confirm your choice.
Select the target program number and confirm your selection.
Go to Target area and confirm your selection.
Select the target area Pre-wash, Main wash or Rinse and confirm
your selection.
The first free block will appear as the target block.
Go to Target block and confirm your selection.
Select the target block and confirm your selection.
Press the "Save" button.
Copying will be carried out.
If the 10thblock will be overwritten by copying, the security question
will appear.
Press the "Save" button.
The overwriting process is carried out and the screen reverts to the
"Copying" sub-menu.
Tip: When the button is pressed, or if after 30seconds no button
has been pressed, copying is not carried out and the display returns
to the "Copying" sub-menu.
Delete menu option
With this menu option a program packet, a program, an area or a
block can be deleted. When the multifunction selector is operated,
only program numbers of available programs appear in the entry field
for program number.
To Next Page
Loading...
Need help?
General
