Miele PW 811 - Mask Programs; Washing and Disinfecting Breathing Masks

Program chart
95
Mask programs
Masks are programs for washing and disinfecting breathing masks with head straps.
 Put the head bands over the masks to protect the visors before loading the machine.
 Put each mask into its own protective bag and fasten it.
 Remove the masks from the bags after processing.
 Spin damp, empty bags using the Spin bags program.
Masks 140°F / 60°C Fill ratio/Load
size
Load Face masks with head straps
PW 811 -
10masks
PW 814 -
13masks
PW 818 -
15masks
Program se-
quence
Disinfection* 140°F / 60°C, 20min.
4 rinses
Masks with pre-wash 140°F / 60°C
Load For heavily soiled masks with head straps
Program se-
quence
Pre-cleaning 86°F / 30°C
Disinfection* 140°F 60°C, 20min.
4 rinses
Spin bags
Load Face mask bags
1:20
Program se-
quence
Spin
* The disinfection parameters for chemo-thermal disinfection (temperature, temperature holding time and dosages) must
be set on site to suit cleaning agents and disinfectants.
To avoid recontamination, in the disinfection program the water for the rinse cycles is not
supplied via the detergent dispenser.
Do not wash masks with connections for helmet-mask combinations.
The clasps are likely to scratch visors.
Use a suitable detergent. Follow the manufacturer's instructions.