Operating the washing machine
20
i
Emergency-stop switch
The emergency-stop switch puts the machine into a safe state in
the event of danger or in order to prevent danger. The emergency-
stop switch must be positioned so that it is directly accessible in
the event of an emergency. Caution, the machine is not discon-
nected from the power supply!
Once the hazard has been cleared, turn the switch clockwise to re-
lease it.
Press the "START" button again to resume the interrupted pro-
gram.
Function buttons
Stop/Finish
When a program has started, the right-hand function button acts as a
stop button.
When it is pressed the selected program is stopped, pressing it again
finishes the stopped program.
Block plus
The corresponding program block (e.g. Pre-wash) is added to the
program.
Starch stop
Press this button if the laundry is to be starched.
Spin cycle
Without spin
Press this button if a final spin is not required after the final rinse.
Settings
Start time
If you press this button before starting the program, information about
selecting a start time will appear on the display.
Information
When the program has started current program information can be
displayed here.
Manual control
Skip
Back Return to previous display page.
/ Next / last line
Save
See Access to supervisor level
1-999 all programs
Delete (backwards)
aA Lower - upper case
To Next Page
Loading...
Need help?
General
