Program chart
86
"Clean machine" program
For cleaning the detergent dispenser drawer, drum, suds container and the drainage
system.
If you use low temperature or disinfection programs on a regular basis, or to remove
coarse soiling, the Clean machine program should be carried out frequently.
Clean machine
Type of fabric No load
Program se-
quence
+ Clean 158°F / 70°C, optional
2 rinses
* The Cleaning block which takes water in through all inlets and has the temperature increased to 158°F / 70°C. can be
selected with this program by pressing the Block Plus button. If the Cleaning block is included in the Maintenance pro-
gram, detergent needs to be dispensed.