Optional modules
51
Weighing system / weighing base
If the machine is equipped with a weighing base, the laundry load
weight is displayed in 0.5lb / 0.2kg increments. The max. loading
weight for the program is displayed beside it.
Resetting the load
display to zero
Do not put anything into the machine and do not lean on it.
This can influence the result of the measurement.
If the load display does not show "0.0" with an empty drum, this can
be rectified by pressing the "0 -reset" button.
1 Cottons Hygiene 0,0/18,0 kg
Rinse
140
+
Main wash
->I<-
1075 rpm
°F
If after resetting to 0 (taring) you discover an overlooked item in the
drum, the following will appear in the display:
1 Cottons Hygiene --,-/18,0 kg
Rinse
140
+
Main wash
->I<-
1075 rpm
°F
Reset the display to0 using the button.
Tip: If the machine is overloaded, for example when laundry is wet, it
will operate in accordance with the rated load after the program
starts. This value is also saved in the operating data module.
At the end of the program when the drum has stopped rotating, the
residual moisture in the laundry is shown in the display.
1 Cottons Hygiene
Door can be opened.
Program finished Residual moisture 60 %
To Next Page
Loading...
Need help?
General
