Problem solving guide
54
Tip: It is not necessary to turn the release element back.
The door can now be opened.
Service interval and BGR display
If the following message appears after "Power On" in the machine
display, either a service or the annual BGR check must be carried
out.
Maintenance interval
Call Technical Service.
1
BGR CHECK
Call Technical Service.
The display will go out after 5 seconds
Fault messages
Repairs to electrical or steam heated machines should only be
performed by a suitably qualified service technician to ensure
safety. Unauthorized repairs could be dangerous.
Malfunctions occurring before or after the start of a program will be
shown in the display
The display remains dark. There is no power to the machine.
Check the plug connectors, power switch and (on-site) fuses.
Power failure
Program stop.
Press Start.
When the power has been restored press "START".
Tip: This error message can mean: The motor thermo-switch of the
drive motor has been triggered.
Allow the motor to cool down.
To Next Page
Loading...
Need help?
General
