Programming
164
Tip: When the button is pressed, or if after 30 seconds no button
has been pressed, overwriting is not carried out and the display re-
turns to the main menu.
Language data
In the Profitronic M 11languages are available as standard. These
can be selected via the "Language" menu option in the Supervisor
level.
Select the "Language" menu option to save an available language
onto a card. Any existing language data on the card will only be
overwritten following additional confirmation.
Call up the "Language" display in the "Data to card" menu option.
Main menu
Language
Data to card
Settings
english (USA):
Option:
– All available languages in the controls
Select one of the languages available in the controls using the mul-
tifunction selector.
The following will then appear in the display during data transmission:
If there was already language data on the card, the security question
will appear.
LanguageData to card
Overwrite existing data?
Press the "Save" button to overwrite the existing data.
Tip: When the button is pressed, or if after 30 seconds no button
has been pressed, overwriting is not carried out and the display re-
turns to the main menu.
Control data
With this menu option available control data (Language, dispensing
data, programs or settings) can be copied from the card to the con-
trols.
Call up the "data to controls" option in the Main menu.
To Next Page
Loading...
Need help?
General
