Installation and connection
64
Installing the washing machine
The washing machine must be installed by Miele Service or by an
authorized dealer. Follow the instructions on the installation plan.
This washing machine is only intended for items of laundry that
have not been proofed with dangerous or inflammable substances.
To avoid the risk of frost damage, the machine must not be located
in rooms which may be subject to very low temperatures
Transport the machine inside the room on a pallet jack.
Do not remove or alter the feet of the machine.
They could be damaged.
Remove packaging carefully with a suitable tool.
Lift the machine off the pallet using a pallet jack.
General operating conditions
This washing machine is intended only for use in a industrial environ-
ment and must only be operated indoors.
Ambient temperature in installation room: 32°F (0°C) to 140°F (40°C).
Relative humidity: non-condensing
Depending on the nature of the installation site, sound emissions and
vibration may occur.
Tip: Have the installation site inspected and seek the advice of a pro-
fessional in instances where increased noise may cause a nuisance.
To Next Page
