Washing
33
Procedure in the event of a program interruption during
operation:
If the program is interrupted when there is water remaining in the ma-
chine or during a spin, the following (e.g.) will appear in the display:
The door is locked.
The drum door is locked. Do not attempt to open it using force.
Press the "Water drainage" button or select the Separate spin
program and press the "START" button.
Open the door at the end of the program.
If no further wash programs are planned:
Turn the machine off using the "0 Power Off" button.
Switch off at the on-site power switch.
Close the on-site supply valves for water and steam.
To Next Page
