Miele PW 811 - Program Chart - Mop Programs; Mop Washing and Disinfection

Program chart
87
Program chart
These programs are suitable for washing, disinfection and conditioning (at different hu-
midity levels) of mops of cotton, blended or microfiber fabric, door mats, polishing pads
and cleaning cloths used in facility management.
To avoid recontamination, in the disinfection program the water for the rinse cycles is not
supplied via the detergent dispenser.
Mop programs
Avoids coarse soiling in the machine.
 Shake the mops out before putting them into the machine.
Mops standard 140°F / 194°F - 60°C / 90°C Fill ratio/Load
size
Type of fabric Cotton and mixed fiber, viscose, polyester and
microfiber mops
1:10
PW 811 - 25lb
(11kg)
PW 814 - 30lb
(14kg)
PW 818 - 40lb
(18kg)
No. pieces
See chart
"Mop load size"
Program se-
quence
Pre-spin
Pre-rinse
+ 2nd pre-rinse, optional
Main wash 140°F/203°F - 60°C/ 90°C, Cool
down can be activated
2 rinses
Final spin
Mops standard
+ finish
140°F / 194°F - 60°C / 90°C
Type of fabric Cotton and mixed fiber, viscose, polyester and
microfiber mops
Program se-
quence
Program sequence as for Mops standard,
then: Finishing agent, damp
or activate block:
Damp, wet, dripping wet
Mops th. disinfection 194°F / 90°C
Type of fabric Cotton and mixed fiber, viscose, polyester and
microfiber mops
Program se-
quence
Pre-spin
Pre-rinse
+ 2nd pre-rinse, optional
Disinfection 194°F / 90°C, 10min., Cool down
can be activated
3 rinses
Final spin