Programming
129
Program name
Select the Program name menu option.
When this is selected, the display will show the following:
Part number
Program name
Supervisor level
Program header
xxxxxxxxx
:
:
Jump to the "Progr. Name" input field.
Select a character and press the multifunction selector.
The selected character will appear in the "name" field.
ABCDEFGHIJKLMNOPQRSTUVWXYZ
Program name
: _ _ _ _ _ _ _
0123456789
a -> A
Use the a->A function button to toggle between upper and lower
case
Use the function button to delete a character and one field to the
left.
Material number
Selecting the Material number input field.
Turn the multifunction selector to the right.
Material number can only be read and not changed. For programs
newly created by the Supervisor xxxxxxxxx will appear here.
Area 1 - 2 - 3
Select input field Area 1
Turn the multifunction selector to the right.
Area 1
Area 2
Create
Program header
: No
:
No
You have the following options:
– No
– 1 block to 10 blocks
If a block number is configured, then an area name must also be en-
tered. This can be given under "Name Area 1" First suggestion for
Area1 "Pre-wash", for Area2 "Main wash" and for Area3 "Rinse".
See "Program structure for more information.
To Next Page
Loading...
Need help?
General
