Installation and connection
65
Facilitating maintenance
For ease of future maintenance and servicing, the minimum distance
to the wall must be observed to enable access.
You must observe the minimum clearances and distance from the
wall.
Minimum distance to the wall approx. 16" / 400mm to allow for main-
tenance.
Adjust the washing machine screw feet until the machine is level.
The machine must be completely level to ensure smooth operation.
Installation on a base
When installed on a raised base, the machine must be secured to the
base and the base must be secured to the floor. When installed on a
concrete base, the machine must be secured to the base.
To Next Page
Loading...
Need help?
General
