Programming
119
Copy menu option
Available program packets, programs, areas and blocks can be
copied using this menu option.
Supervisor level
Programming
Delete
Copy
When the multifunction selector is operated the following appears in
the display:
Supervisor level
Copy
Area
Program
Copy program
With this menu option all programs, a program packet (e.g. Program
1to10) or an individual program can be copied. Existing programs
will however be overwritten, following additional confirmation. When it
is selected the following will appear in the display:
1 Cottons Hygiene 194
2 Cottons Universal 140
Copy
Program
1-999
°F
°F
158 Masks 140
159 Masks with Prewash 140
Copy
1-999
Program
°F
°F
After selecting the program and pressing the multifunction selector
this is marked with a.
The tick is deleted following a further confirmation with the multi-
function selector.
Press the "Save" button to complete the marking process.
If all programs are to be copied, press the 1-999button to mark
these.
Tip: Depending on the number of programs to be copied, the lowest
target program number is selected, from which the following pro-
grams can be saved.
To Next Page
Loading...
Need help?
General
