Operating the washing machine
19
Control panel
a
Display
When the machine is switched on the welcome screen will appear
briefly, followed by the first program or the last program started.
b
Function buttons
These buttons can be allocated specific functions depending on
the status of the machine.
These appear in the display above the buttons and are highlighted
when selected.
By reprogramming "Direct button allocation" the first 6 programs in
the program list can be selected using buttons 1 - 6.
c
Start button
When this is pressed, the selected program will start. After a pro-
gram has been started, the display content can be shown again by
pressing this button.
d
Optical interface PC
Using PC software, data can be transmitted to and from the con-
trols to a PC.
The optical interface on the control panel provides the connection
point.
e
Multifunction selector
This is used to select menu options (by turning it) and to confirm
your selection (by pressing it).
f
Card reader
When a card is inserted, the wash programs on the card can be
used. Insert the card in the direction of the arrows.
g
I Power On button
For switching the machine on
h
0 Power Off button
For switching the machine off
To Next Page
Loading...
Need help?
General
