Installation and connection
68
Dispensing agent connection to the liquid dispensing
mixing compartment
Connections 1 and 2 are provided for viscous detergents. These
connection sockets are sealed and need to be drilled out with an
1/3" / 8mm drill bit.
Use caution when drilling through the outer wall (1) only, as there is a
deflecting wall (2)10mm behind it.
If the drilled out connections are no longer required, they must be re-
sealed.
Connections 3 to 12 are for liquid dispensing. These connection
sockets are sealed and must be cut to the diameter of the hose with a
suitable saw. If the cut out connections are no longer required, they
must be resealed.
To Next Page
Loading...
Need help?
General
