Supervisor level
Main menu
Erase card data
Data to control unit
You have the following options:
– Data to card
– Control data
– Delete card
Select "Control data".
When "START" is selected the following appears in the display, de-
pending on the data content of the card:
Language
If there is one language on the card, the following appears:
Languague choice
Data to control unit
Card language
english (USA):
Language
: english (USA)
Select "Language on card" and confirm your selection by pressing
the multifunction selector.
The display changes to the following:
Language
Data to control unit
LanguageData to control unit
Overwrite existing data?
If a language was already in the selected position in the controls, the
security question will appear.
Press the "Save" button to overwrite the existing data.
Tip: When the button is pressed, or if after 30 seconds no button
has been pressed, overwriting is not carried out and the display re-
turns to the main menu.
Dispensing
All dispensing data for available programs in the controls can be
copied onto a card using this option.
To Next Page
Loading...
Need help?
General
