Program
Data to control unit
If a target program place was chosen which is already occupied by
another program the security question will appear.
Settings
With this menu option settings from the Supervisor level can be
copied from the card into the controls.
Existing programs in the controls will be overwritten.
Select the "Settings" menu option.
Dispensing
Data to control unit
:
Settings
13:40 10.05.15
Press the multifunction selector.
The security question will appear.
SettingsData to control unit
Overwrite existing data?
Press the "Save" button to confirm.
During data transfer the following appears in the display:
Settings
Data to control unit
Delete card
All data on the card can be deleted with this menu option.
Select the "Delete card" menu option.
Supervisor level
Main menu
Erase card data
Data to control unit
Press the multifunction selector to confirm your selection.
The following will appear in the display:
To Next Page
Loading...
Need help?
General
