Programming
171
Turn the multifunction selector to select the relevant valve and press
to confirm your selection.
Manual control
Water intake
Valve
Wat.level:
: KH
100 mm
Turn the multifunction selector to select "Level" and press to con-
firm your selection.
Turn the multifunction selector to set the level and press to confirm
your entry.
When the valve and level have been selected, start water intake by
pressing the "START" button.
Tip: Water intake stops when the set level is reached or if the but-
ton is pressed again.
Dispensing
Dispensing valve and amount can be set.
This function can only be selected if "yes" is programmed in the Ser-
vice level Dispensing display.
Press the "Dispensing" function button.
Manual control
Dispensing
Dispensing pump
Dispensing amount
:
100 ml
D1
:
Press the multi-function selector to confirm the selection of "Dis-
pensing pump".
Manual control
Dispensing
Dispensing pump
Dispensing amount
:
100 ml
D1
:
Turn the multifunction selector to select the relevant dispenser
pump and press to confirm your choice.
Manual control
Dispensing
Dispensing pump
Dispensing amount
:
100 ml
D1
:
Turn the multifunction selector to select the dispensing amount and
press to confirm your choice.
Turn the multifunction selector to set the relevant dispenser pump
and press to confirm your entry.
Press the "START" button to start dispensing.
To Next Page
Loading...
Need help?
General
