Optional modules
47
– Deleting data
– Module (delete Overall and Program data)
– Overall data (delete Overall data only)
– Program data (delete Program data only)
Tip: The function can be deselected by pressing the "Operating
data" button again.
If the data storage capacity in the Operating data module is full, a
message appears when the "START" button is pressed to inform
you that Operating data will be overwritten.
Tip: If the "Back" button is pressed or if the "START" button is
not pressed within 30seconds, the program will not start and the dis-
play appears as before program start.
To Next Page
Loading...
Need help?
General
