MIMAKI CJV200-160

To Next Page

To Previous Page

Chapter 2 Printing

• Move the take-up unit to the left or right when it is not in use. Print quality may be affected

if the front edge of the media hits the take-up unit.

Main Page

Table of Contents2
Introduction6
TV and Radio Interference6
To Ensure Safe Use8
Symbol Marks8
Usage Precautions9
Power Supply Precautions10
Disposing of the Product12
Notes on Handling Ink or any Other Liquid Used with the Machine13
Ink Specifications14
Restrictions Concerning the Expiration Date of Ink Used in the Machine15
Installation Precautions16
Installation Space17
When Relocating this Machine17
Safety Interlocks18
Warning Label19
Chapter 1 Before Use21
Part Names and Functions22
Front22
Rear and Right Side View23
Carriage24
Station24
Platen24
Pinch Rollers and Grit Rollers25
Media Sensor25
Power Supply Switch26
Main Power Switch26
Operating Panel27
Connecting the Power Cable30
Turning on the Power30
Turning off the Power31
Connecting a PC to the Product33
Using a LAN Cable33
Using a USB Cable34
System Configuration35
Installing the Mimaki Driver36
Installing RIP Software36
Obtaining Color Profiles36
Setting up RIP Software36
Ink Replacement Method38
When Using 440 Ml Ink Cartridge38
When Using 600 Ml Ink Cartridge39
Replacing Ink40
Chapter 2 Printing45
Print Process46
Adjusting Print Head Height49
Adjust the Pinch Roller Positions50
MM Size51
MM Size53
Loading the Media54
Media54
Media Handling Precautions54
Take-Up Unit55
Feeding Unit57
Loading the Roll Media59
Setting Leaf Media64
Registering the Media67
Setting the Pressure and Number of Pinch Rollers to Use69
Setting the Heater Temperature70
Test Printing71
Changing the Layout Direction for Test Printing71
Ejection Failures72
Head Cleaning73
Auto Correction74
Feed Correction75
Feed Correction Procedure75
Correcting the Drop Position77
Drop Position Correction Procedure77
Preparing RIP Data79
Printing81
Changing the Origin81
Starting Printing82
Pausing Printing82
Stopping Printing (Data Clear)83
Cutting the Media84
Chapter 3 Cutting86
Cutting Process86
Installing Cutting Tools88
Using the Cutter88
Installing the Cutter Holder90
Using a Pen92
Setting the Cutting Conditions96
Test Cutting97
Cutting the Cutting Data98
Changing the Origin98
Starting Cutting98
Pausing Cutting99
Stopping Cutting (Data Clear)99
Retracting the Cutter Unit99
Chapter 4 Cutting Data with Register Marks102
Process for Cutting Data with Register Marks102
Creating Register Marks104
Register Marks104
Register Mark Size105
Spacing between Register Marks106
Reading Range of Register Marks107
Plotting Areas Around Register Marks108
Combined Operations of Printing and Cutting109
Setting Mark Detection Conditions110
Detecting the Position of the Register Mark Origin111
ID Cut Process112
Chapter 5 Setup113
Media Setting Menu114
Maintenance Menu117
Registering Nozzle Recovery Manually120
Nozzle Check (Option)121
Function Setting Menu122
Registering and Correcting a 600 Ml Ink Cartridge124
Required Items124
When Using for the First Time124
Environment Setting Menu127
Machine Status Menu129
Cutting Menu130
Copying the Last Data132
Preventing Uncut Media133
Chapter 6 Maintenance135
Maintenance Precautions136
Maintenance Methods137
Maintenance Items and Timing137
Ink Maintenance138
Cap Rubber Cleaning138
Carriage Underside Cleaning139
Wiper Cleaning140
Cleaning the NCU (Option)142
DAS (Automatic Correction Function) / Sheet Width Sensor Cleaning143
Ink Discharge Channel Cleaning144
Media Sensor Cleaning145
Media Cutter Cleaning145
Media Holder Cleaning146
Jam Sensor Detecting Plate Cleaning147
Platen Cleaning147
Cover (Exterior) Cleaning148
When this Printer Is Left Unused for a Long Time148
Replacement of Consumable Item150
Consumable Item Replacement Timing150
Wiper Replacement151
Cap Replacement152
Replacing the Absorber Around the Station153
Pinch Roller Replacement155
Media Holder Replacement155
Media Cutter Replacement157
Waste Ink Tank Replacement158
Cutter for Cutting Machine (CJV200 Only)161
Pen Line Replacement (CJV200 Only)161
Chapter 7 Troubleshooting163
Troubleshooting164
The Power Does Not Turn on164
Printing Is Not Possible164
The Media Jams or the Media Is Dirty164
Image Defects Occur165
The Heater Temperature Does Not Rise to the Specified Value167
The Ink Has Leaked out168
Cutting Related (CJV200 Only)168
Problems Causing Messages to Appear173
Warning Messages173
Ink Error175
Error Message176
System Halt183
Chapter 8 Appendix185
Specifications186
LICENSE Library189

MIMAKI CJV200-160 - Page 63

Table of Contents

Related product manuals