VIII
10. Do not subject the transducers to knocks or drops.
Use of a defective transducer may cause an electric
shock.
11. Do not open the covers and front panel of the
system. Short circuit or electric shock may result
when the system hardware is exposed and powered
on.
12. Do not use this system simultaneously with
equipment such as an electrosurgical unit,
high-frequency therapy equipment, or a defibrillator,
etc.; otherwise electric shock may result.
13. Only use the ECG leads provided with the ECG
module; otherwise electric shock may result.
14. When moving the system, you should first fold the
LCD display, disconnect the system from other
devices (including transducers) and disconnect the
system from the power supply.
15. Accessory equipment connected to the analog and
digital interfaces must comply with the relevant IEC
standards (e.g., IEC 60950 information technology
equipment safety standard and IEC 60601-1 medical
equipment standard). Furthermore all configurations
must comply with the standard IEC60601-1-1. It is the
responsibility of the person, who connects additional
equipment to the signal input or output ports and
configures a medical system, to verify that the
system complies with the requirements of
IEC60601-1-1. If you have any questions regarding
these requirements, consult your sales
representative.
16. Prolonged and repeated use of keyboards may result
in hand or arm nerve disorders for some individuals.
Observe the local safety or health regulations
concerning the use of keyboards.
CAUTION:
1. Precautions concerning clinical examination
techniques:
This system must be used only by qualified medical
professionals.
This operator’s manual does not describe clinical
examination techniques. The clinician should select the
proper examination techniques based on specialized
training and clinical experience.
To Next Page
Loading...
