IX
2. Malfunctions due to radio wave:
z
If a radio wave emitting device is used in the
proximity of this system, it may interfere with
operations. Do not bring or use devices that
generate radio waves, such as cellular
telephones, transceivers, and radio
controlled toys, in the room where the
system is installed.
z If a person brings a device that generates
radio waves near the system, ask him / her to
immediately turn OFF the device.
3. Precautions concerning movement of the system:
When you place the system on the mobile trolley and
move them together, you must secure all objects on the
mobile trolley to prevent them from falling. Otherwise
you should separate the system from the mobile trolley
and move them individually. When you have to move
the system with the mobile trolley upward or downward
the stairs, you must separate them first and then move
them individually.
Object placed on the monitor may fall and injure an
individual.
Fasten and fully secure any peripheral device before
moving the system. A loose peripheral device may fall
and injure an individual.
4. Do not expose the system to excessive vibration
through transportation. Mechanical damage may result.
5. Do not connect this system to outlets with the same
circuit breakers and fuses that control the current of
devices such as life-support systems. If this system
malfunctions and generates overcurrent, or when there
is an instantaneous current at power ON, the circuit
breakers and fuses of the building’s supply circuit may
be tripped.
6. Always keep the system dry. Avoid transporting this
system quickly from a cold place to a warm place;
otherwise condensation or water droplets may form
allowing a short circuit and possible electric shock.
7. If the circuit protector is tripped, it indicates that the
system or a peripheral device was improperly shut
down and the system is unstable. You cannot repair the
system under this circumstance and must call the
Mindray Customer Service Department or sales
representative.
To Next Page
Loading...
