Wireless LAN
A-2
c) Local TCP/ IP preset items are described as follows:
Name Description
Station Name
Name of the ultrasound system.
Station Location
Location or department where the system is placed.
Current Network
Adapter
To select net adapter type.
DHCP
/ Static
If “DHCP” is selected, IP address will be automatically obtained
from DNS server; if “Static” is selected (using static IP address),
you need to enter the IP address.
IP Address
IP address of the system.
Subnet Mask
Used to set different network segment.
Gateway
Used to set the gateway IP.
OK
Click to confirm parameter setting.
Cancel
Click to cancel parameter preset.
The IP address of the system should not be occupied by other devices in the LAN, or
failure may result.
To Next Page
Loading...
Need help?
General
