DICOM
B-7
z Select an item in the service list, and click [Delete] to delete the service.
z Select an item in the service list, and click [Default] to set the server to be the
default service.
3. Select an item in the service list, and click [Verify] to verify the connection.
4. Click [Exit] to confirm the setting and exit the page.
DICOM print setting items are described as follows:
1 Device: After you set the server (s) in DICOM Server Setting, the name (s) will
appear in the drop-down list, select the name of the print server.
2 Service Name: Default is xxx-Print, and it can be modified.
3 AE Title: Application Entity title, which should be consistent with that of the print
server.
4 Port: DICOM communication port, which should be consistent with that of the print
server port.
5 Maximum Retries: 0-9.
6 Interval Time (s): Reserved feature.
7 Timeout: Refers to time after which the system will stop trying to establish a
connection to the service. Value: 5
－60s, in increments of 5s, and 15 by default.
8 Copies: Refer to copies of printed files. You can select among 1 through 5, or directly
enter the number.
9 Settings: The system supports RGB(color printing) and MONOCHROME2 (black
and white printing).
To Next Page
Loading...
