DICOM
B-8
Please select the type the printer supports.
10 Film Orientation: Select between LANDSCAPE and PORTRAIT
11 Priority: Specify printing task priority among HIGH, MED and LOW.
12 Film Size: Select film size among the selections listed in the drop-down list.
13 Display Format: Specify quantity of printed files. e.g. STANDARD\2, 3 indicates 6
images are printed for each page.
14 Configuration Info: Enter configuration information in the field.
15 Medium Type: Specify print medium: Paper, Clear Film, and Blue Film.
16 Destination: Specify where the file is exposed: MAGAZINE (stored in the magazine),
or PROCESSOR (exposed in the processor).
17 Min Density: Enter the minimum density of the film
18 Max Density: Enter the maximum density of the film
19 Magnification Type: Select how the printer magnifies an image to fit the film.
Replicate: interpolated pixels belong to duplicate of adjacent pixels.
Bilinear: Interpolated pixels are generated from bilinear interpolations between
adjacent pixels.
Cubic: interpolated pixels are generated from cubic interpolations between adjacent
pixels.
None: without interpolation.
Select how the printer magnifies an image to fit the film.
20 Trim: Specify whether you want a trim box to be printed around each image on the
film: Yes or No.
21 Add: Click to add print service to the service list.
22 Cancel: Click to cancel parameter setting.
23 Update: Select an item in the service list, change the parameters in the above area,
and click [Update] to update the item in the service list.
24 Delete: Click to delete the selected service in the service list.
25 Default: Select an item in the service list, click [Default] and you can see “Y” in the
Default column.
26 Verify: Click to verify if the two DICOM application entities are normally connected.
27 Exit: Click to exit the screen.
Parameter setting should be consistent with the printer performance:
z For instance, if the printer cannot support film size to be “8IN*10IN”, please select
the printer supported size.
z Settings: RGB is color printing and MONOCHROME2 is black and white printing.
z Medium Type: for black and white printing, usually Blue Film or Clear Film is used,
and for color printing, Paper is usually used. For details, please refer to printer
conformance statement.
z Change the setting if necessary.
B.1.4.3 DICOM Worklist Setting
1. To enter the “Worklist” page: [Setup]→[Network Preset]→[DICOM Service Setting]→
[Worklist].
To Next Page
Loading...
