DICOM
B-14
DICOM query/retrieve setting items are described as follows:
1 Device: After you set the server (s) in DICOM Server Setting, the name (s) will
appear in the drop-down list, select the name of the query/retrieve server.
2 Service Name: Default is xxx-QueryRetrieve, and it can be modified.
3 AE Title: Application Entity title, which should be consistent with that of the
Query/Retrieve server.
4 Port: DICOM communication port, which should be consistent with that of the
query/retrieve server port.
5 Maximum Retries: Reserved feature.
6 Interval Time (s): Reserved feature.
7 Timeout: Refers to time after which the system will stop trying to establish a
connection to the service. Value: 5
－60s, in increments of 5s, and 15 by default.
After information or image is being retrieved for 15s, the system will close the
connection with the server if no other information or image is being retrieved.
8 Add: Click to add services to the service list.
9 Cancel: Click to cancel parameter setting.
10 Update: Select an item in the service list, change the parameters in the above area,
and click [Update] to update the item in the service list.
11 Delete: Click to delete the selected service in the service list.
12 Default: Select an item in the service list, click [Default] and you can see “Y” in the
Default column.
To Next Page
Loading...
Need help?
General
